Compatible Systems MicroRouter 900i - Manual (Page 31)

Chapter 6 - Basic Configuration Guide 25
TB: Use configure and set either the RIPVersion keyword or the
OSPFEnabled keyword in the IP WAN 0 section. Add static
routes and a default router using the edit config IP Static
command.
Saving a Configuration File to Flash ROM
Once a configuration is complete, you can save it to the router’s Flash
ROM. Until saved, all changes are made in a separate buffer and the
actual router interfaces run as before the changes were made.
CV: Use the Save to/Device option from the File menu.
TB: Use the save command.