Making coffee with whole beans – Cuisinart DGB-700 User Manual

Page 10

Advertising
background image

10

MAKING COFFEE WITH

WHOLE BEANS

Before you make the first pot of coffee in your

new Cuisinart

®

Fully Automatic Burr Grind &

Brew™ Coffeemaker, we recommend operating

the coffeemaker once, using only water and a

paper filter. This will remove any dust or resi-

dues which will remain in the system from the

manufacturing process. Note: Allow the grinder

to grind free of beans for this process.
1. Fill the Water Reservoir

Open the reservoir lid. Pour the desired

amount of water in the reservoir using the

water level window indicator. Close the res-

ervoir lid. Note: Do not exceed the

12-cup line. Doing so may cause the carafe

to overflow.

2. Add Beans

Lift the hopper lid, using the recess on

either side. Fill the hopper with beans. We

recommend keeping the hopper at least

halfway full. Be sure that you have a suffi-

cient amount of beans in your hopper for

the amount of coffee you intend to brew

(maximum capacity is ½ lb. Do not over-

pack the hopper. Over-packing the hopper

may result in jamming the grinder.)

For easy filling, the hopper container can be

taken out by turning the hopper container

release knob to the unlock position.
Note: Do not put any water in the unit once the

hopper container has been removed. If water

gets into the grinder motor, the motor may

become damaged and may malfunction.
Put hopper lid back in place.
3. Lock Hopper

If you have removed the hopper from the

unit, be sure that the hopper container

release knob is in the unlocked position and

place the hopper container back in the unit.
Turn the knob to locked position.
This unit is equipped with a safety interlock

system. The unit will not operate grinding

function if the hopper container is not in

place. If you try to turn on the unit for

grinding with the hopper out of place, the

unit will beep continuously until the missing

part is installed.
The brewing process can be restarted by

pressing the On button. Restarting the pro-

cess will not affect coffee results.

4. Insert Coffee Filter

Open filter door by pressing filter basket

door release button. Remove filter basket

cover and place a #4 basket paper filter or

Cuisinart’s commercial style permanent fil-

ter in the basket.

Note: When using our permanent filter, be sure

that the handle is positioned toward the front of

the unit. If you do not, the handle may interfere

with the flow of coffee into the filter basket.
Also note: Using our permanent gold-tone filter

will allow some fine coffee grounds to fall into

the carafe.
When using a paper filter, be sure that the filter

is completely open while touching the side walls

and bottom of the basket.
Put filter basket cover in place.
Close filter door.
The unit is equipped with a safety interlock

system. The unit will not operate if the filter bas-

ket cover or filter basket are not in place or if the

filter door is not closed. If you try to turn the unit

on while the filter compartment is out of place,

the unit will beep continuously until the missing

part(s) are installed.
5. Brewing

A. Immediate Grinding and Brewing

1. Turn the Grind Control Knob to select the

number of cups you want to brew. The

coffeemaker will grind the corresponding

amount of beans. The unit will automatical-

ly adjust for low cup settings.

2. Press the Strength Control button to set

coffee strength. MILD, MED or STRONG

will show on the LCD display.

3. Press the On button. The indicator will light

and the process will begin.

B. Programmed Brewing

Press the Program button. The indicator

will light and the display will show the

programmed time for as long as the button

is depressed. The display reverts back to

time of day once the button is released.

(To set the programmed time, see

Programming Your Coffeemaker on page 8.)

1. Turn the Grind Control knob to select the

number of cups you want to brew. The

coffeemaker will grind the corresponding

amount of beans. The unit will automatical-

ly adjust for low cup settings.

2. Press the Strength Control button to set

coffee strength. MILD, MED or STRONG

will show on the LCD display.

3. The coffeemaker will begin brewing at the

programmed time.

Advertising