Craig CMP168C - Manual (Page 3)

SAFETY PRECAUTIONS
the type of power source indicated on the
marking label. If you are not sure of the
type of power supply to your home, consult
your appliance dealer or local power
company. For products intended to operate
from battery power, or other sources, refer
to the operating instructions.
GROUNDING OR POLARIZATION
This product is equipped with a polarized
alternating-current line plug (a plug having
one blade wider than the other). This plug
will fit into the power outlet only one way.
This is a safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug should still
fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
POWER-CORD PROTECTION
Power-supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them. Paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the appliance.
LIGHTING
To protect your production from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug from
the wall outlet and disconnect the antenna
or cable system. This will prevent damage
to the product due to lightning and power-
line surges.
POWER LINES
An outside antenna system should not be located in te vicinity of overhead power lines
or other electric light or power circuits, of
where it can fall into such power lines or
circuits. When installing an outside antenna
system, extreme care should be taken to
keep from touching such power lines or
circuits as contact with them might be fatal.
OVERLOADING
Do not overload wall outlets and extension
cords as this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY
Never push objects of any kid into this
product through openings as they may touch
dangerous voltage points or short out parts
that could result in fire or electric shock.
Never spill or spray any type of liquid on the
product.
OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the
product, be sure the antenna system is
13.
11.
14.
12.
15.
16.
17.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
2