CTA 7 Series - Manual (Page 14)

SECTION 7. ROUTINE MAINTENANCE
DAILY
Charge your batteries every night so your Power Chair is ready to go when you are.
WEEKLY
1.
Check tyre pressures (30PSI front, 30PSI rear)
2.
Clean frame and vinyl parts with mild soapy solution.
3.
Wipe upholstery with a clean damp cloth
4.
Check function of electric brakes
5.
Check all cables and connectors are secured; i.e. battery, motors and controller.
6.
Check both front and rear castors for any excessive movement about the top or
bottom bearing mounts or pintle shaft. Contact your nearest Glide
Rehabilitation Products agent for repair of this fault if it occurs.
MONTHLY
1.
Give the chair a general inspection for loose nuts and bolts.
2.
Inspect and clean corrosion from battery terminals and cable connectors. Coat
with petroleum jelly
ANNUALLY
It is advisable to have an annual inspection of the Power Chair performed by an
authorised Glide Products Agent. Their knowledge and experience enables them to
identify and correct problems that might otherwise go undetected.
For any questions concerning procedures or service, contact your nearest Glide
Rehabilitation Products Agent or Glide Rehabilitation Products direct.
NOTE: As stated in our warranty, we recommend that your wheelchair be
returned to an authorized Glide Rehabilitation Products agent for it’s free 3 month
service check. This is a one off free service calculated from date of purchase.