CTA 7 Series - Manual (Page 18)

1.
To adjust speed when in this mode – The maximum speed can be adjusted by
left or right movements of the joystick. Left will decrease the speed, right will
increase it. Forward or reverse movements of the joystick will take you back
into drive mode.
2.
When the control system is in this mode the actuator indicator will be
illuminated. The section of the wheelchair symbol that is illuminated shows the
actuator that is selected for adjustment. To change the selected actuator move
the joystick left or right. To make adjustments to the selected actuator move the
joystick forwards or backwards.
Horn Button
Horn will sound for as long as button is pressed
Charger Socket
This 3 pin socket is used to connect your battery charger and also to programme/re –
programme controller using the PP1 programmer, should this be necessary.
PENNY & GILES FAULT TREE
Figure 4. Penny & Giles Fault Tree