Campbell Hausfeld RP4100 - Manual (Page 2)

2
Operating Instructions
www.chpower.com
(tire, football, raft, etc.) and turn on
the inflator.
3. When the object is firm, switch the
inflator off. Do not over inflate
objects.
FUSE REPlacEMEnt
When replacing the fuse, make sure
the inflator is turned off and nothing is
connected to the inflator.
1. Unscrew the top of fuse holder.
2. Replace with a new 2-amp fuse.
Always replace a blown fuse with
the same size fuse.
3. Screw the top of fuse holder back on
to the unit.
Maintenance
1. This product has no user serviceable
parts and does not require
lubrication.
2. Do not store outdoors. When not in
use, store in a cool dry place.
technical Service
For information regarding the
operation or repair of this product,
please call 1-800-543-6400.
Preparation (continued)
Never connect green
(or green and yellow)
wire to a live terminal.
ExtEnSIOn cORDS
1. Use only a 3-wire extension cord
that has a 3-blade grounding plug,
and a 3-slot receptacle that will
accept plug on product.
2. Make sure extension cord is in good
condition, and heavy enough to
carry the current the product will
draw. An undersized cord will cause
a drop in line voltage resulting in
loss of power and overheating.
3. The chart on page 2 shows correct
size to use depending on cord
length. If in doubt, use next heavier
gauge.
nOtE: The smaller the gauge number,
the heavier the cord.
Operation
tIRES
1 a. Remove valve stem cap.
b. Attach the universal adapter from
the inflator to the valve stem with
the lever in the up position .
c. Be sure to press universal adapter
down over valve stem threads
completely.
d. When universal adapter is firmly in
place, press locking lever down to
lock onto valve stem (See Fig. 2).
Figure 2
2. Turn the inflator on.
3. When tire is at the desired pressure,
turn the inflator off.
4. Check the tire pressure using a
separate gauge.
InFlataBlES
1. To use the inflation accessories,
snap either piece into the universal
adapter and push the lever to lock
into place. The inflation accessory
will fit securely.
2. Insert the appropriate inflation
accessory into the inflatable object
Recommended Extension cords
length of cord (ft) 25 50 100 150
Gauge of Cord 18 18 16 14
Universal
Adapter
Lock
Valve Stem