Clarion VDH910 - Manual (Page 17)

• To cancel FF or REW, press PLAY or the STOP button.
Using Forward And Reverse Search
The VDH910 includes a 2-speed forward/reverse picture
search for quick location of a desired video segment at 7-
times SP or 21-times SPL speed.
• To forward search the tape, press FF once (for 7-times SPL
speed) or press and hold FF (for 21-times SPL speed)
while the tape is playing. When you find the desired video
OWNER’S MANUAL/INSTALLATION GUIDE
15
segment, press PLAY or release the FF button to cancel
this function and resume playing the tape.
• To reverse search the tape, press REW once (for 7-times
SPL speed) or press and hold REW (for 21-times SPL
speed) while the tape is playing. When you find the
desired video segment, press PLAY or release the REW
button to cancel this function and resume playing the tape.
NOTE: While in FF or REW Jet Search, audio signals are muted.
If streaks, blurring, or horizontal jitters occur, adjust the picture
using the CH/TRK buttons on the remote control.
Still and Frame Advance
Press the STILL/SLOW button once to stop on a single
frame. Press the STILL/SLOW button repeatedly to advance
one frame at a time. Press PLAY to resume normal viewing.
Slow Motion Playback
While in the Still mode, press and hold the STILL/SLOW
button for 2 seconds for Slow Motion Playback. Press PLAY
to resume normal viewing.
Figure 14. REW, PLAY, and FF on the VDH910 Remote Control.