Whisking, Chopping and grinding – Cuisinart CSB-78 User Manual

Page 9

Advertising
background image

9

WHISKING

1. Insert the whisk attachment into the motor body. (See,

page 8.)

2. Place the whisk into mixture that will be blended.
3. Press and hold the On/Off button. The hand blender will

continue to run as long as the switch is pressed in. To turn

hand blender off, release the On/Off button and the motor

will stop.

CHOPPING AND GRINDING

Processing Food
1. Place the prep bowl firmly on a flat sturdy surface like a

countertop. Be sure the blade is assembled to use the

blade edge that is appropriate for the food to be pro-

cessed.

2. Place food in the prep bowl. Be sure the food is cut into

small pieces, and the bowl is not overloaded.

3. Place the chopper/grinder cover on top of the prep bowl.

Be sure the cover is properly seated.

4. Press the On/Off button on the hand blender.
5. Do not operate the chopper/grinder attachment for longer

than 15 seconds at a time.

Note: Due to the powerful motor provided with this unit,

Cuisinart recommends using one hand to support the

chopper/grinder during operation.

6. When you have finished processing the food, stop the

machine by taking your fingers off the On/Off button.

7. WHEN THE BLADE STOPS MOVING, remove the hand

blender motor body from the chopper/grinder cover, and

remove the cover from the chopper/grinder.

8. Carefully remove the blade assembly, holding it by the grip-

ping ridges on the plastic sheath. NEVER TOUCH THE

BLADE ITSELF.

9. Remove food with a spatula.

Note: Do not operate the chopper/grinder attachment

without food contents in the prep bowl.

frequent uSeS for chopper grinder
ingredient

comments

Baby foods (always consult
pediatrician or family physician
for appropriate food recom-
mendations)

Place small amounts of cooked foods into chopper/
grinder bowl. Add small amount of appropriate liquid.
Use pulse action to chop, then continuous-hold action
to blend.

Bread crumbs – fresh or dry
(day old)

1 cup; Pulse to chop, then process until desired con-
sistency is reached.

Hard cheese (Asiago, Locatelli,
Parmesan, Romano, etc.)
(Not recommended for softer
cheeses unless making dip or
dressing.)

Cut into ¼-inch pieces. Pulse to chop, then process
until desired consistency is reached, no more than 1
ounce at a time.

Chocolate

Cut into ½-inch pieces; may chill in freezer for 3
minutes before chopping. Pulse to chop, then process,
no more than 1 ounce at a time, until desired texture
is reached.

Creamy Dressings/Dips

Place ingredients in chopper grinder bowl; do not
cover or spill on stem. Pulse to chop, then process as
needed to desired consistency.

Garlic

Peel cloves, up to 6 cloves. Pulse to chop.

Gingerroot (fresh)

Peel, cut into ½-inch pieces. Pulse to chop, ½ ounce
(1-inch) at a time.

Herbs, fresh

½ cup; must be clean and dry. Pulse to chop.

Nuts

Shelled, toast first for best flavor. Pulse to chop, then
process up to ½ cup at a time, until desired chop is
reached from coarse to fine. May be processed to
nut-butter stage.

Onion

Peel, cut into ½-inch pieces. Pulse to chop, up to ½
cup at a time (about 1 small onion), until desired chop
is reached.

Vegetables (cooked)

Cut into ½-inch pieces and cook until fork tender.
Pulse to chop, up to ½ cup at a time. May need to add
cooking liquid, stock or milk to process to a vegetable
purée. Not recommended for mashed potatoes.

Vegetables (uncooked)

Peel as needed, cut into ½-inch pieces. Peel celery
with vegetable peeler to remove tough strings. Pulse
to chop ½ cup at a time.

Meat (Beef, Pork - Cold)

2.5 oz or 75g, cut into ½-inch pieces.

Advertising