Crest Audio CV 20 - Manual (Page 5)

C0501909BB C0501910
MONO
INPUT
MODULE
8 Subgroups are also provided for conventional groupings of the
inputs via 8 individual assignment switches. Stereo panning
between group pairs can also be achieved by selecting the
“PAN ON” Switch.
Left/Right and Mono routing is done by pressing either the
L-R or M/C switches. A separate LCR switch is provided. This
allows panning between the Left, Mono and Right buses for
LCR applications.
A high quality 100 mm fader is standard on all inputs with 10
dB of gain when in the full up position. Also provided is full
VCA control of the fader via a soft VCA assignment and mute
control locally or via grouping (see master control block).
The Solo switch allows PFL or AFL monitoring of the channel
selected from the master section. The Solo Switch is also
part of the VCA assignment (see master section). Other
monitoring functions include a 5-segment bar graph meter
for maximum visibility.
MONO
INPUT
MODULE
CV 20