Connect Tech Blue Heat/PCI PCI Serial Communications - Manual (Page 45)

Blue Heat/PCI User’s Manual, Connect Tech Inc.
45 Revision 0.11
Specifications for the Blue Heat/PCI PTM
Power Requirements
„ Blue Heat/PCI PTM
+5 VDC
±5% @ 360mA (typical)
±12 VDC ±10% @ 32mA (typical)
Communications
„ Blue Heat/PCI PTM
o Communication controllers:
16C2850 dual UARTs c/w 128 byte TxD/RxD FIFO buffers
o Programmable baud rate generator:
50 BPS to 921.6 KBPS on all ports
Control Signals
„ Blue Heat/PCI PTM
DTR; DSR; RTS; CTS; RI; TxD; RxD; DCD
Dimensions
„ Blue Heat/PCI PTM
Length: 12.60 cm Width: 10.70 cm
Height: 1.50 cm Weight: 0.10 kg
Connectors/Interface
„ Blue Heat/PCI PTM:
On board male and female DB-9 connectors
Part Numbers
BP0001 Blue Heat/PCI PTM, 2 ports, RS-232, no cable
Certification
The Blue Heat/PCI PTM product family is to be included into a device ultimately subject to
FCC, DOC/IC, and CE certification. The customer is responsible for bringing the completed
device into compliance prior to resale.
Connect Tech has designed the Blue Heat/PCI PTM with EMI and EMC considerations such as:
● Ground and power planes
● Controlled slew-rate signals
● EMI/EMC reducing PCB layout