Quick start guide, V2 system overview - front, V2 system overview - rear – Proavio EB800MSv2 User Manual
Page 3: Proavio, Asc mode
Quick start guide
6
V2 System Overview - Front
This section provides information on the front features of your EB800MS V2.
V2 | Professional 12G SAS Storage Array for 4K Workflows
PROAVIO
TM
8
V2 System Overview - Rear
This section provides information on the rear features of your EB800MS V2.
Hot-swap Fan Module 1
Studio-quality low noise cooling module.
Hot-swap Fan Module 2
Studio-quality low noise cooling module.
Power Switch
ON/OFF system power switch
12G SAS Host Port 1 (Disk 1-4)
4x 12Gb/s SAS host connection (SFF8644). Connects to RAID controller Port 1.
Controls disks 1 through 4.
ASC Control Switch
Advanced Sound Control switch. Select ASC mode (ON=Ultra Quiet)
or Auto mode (OFF). Auto mode is recommended for most environments.
Engage ASC mode when critical listening or sound control is required. Turn ASC
OFF during breaks or during normal operation. Running ASC mode for extended
periods can potentially overheat your array or damage the your drives.
12G SAS Host Port 2 (Disk 5-8)
4x 12Gb/s SAS host connection (SFF8644). Connects to RAID controller Port 2.
Controls disks 5 through 8.
Universal Auto-Switching Power Supply
Power supply.
1
2
Alarm MUTE Button
Press to mute fault notification alarm.
Temperature/Overheat Indicator
Thermal Fault Indicator 1(disk 1-4), Thermal Fault Indicator 2 (disk 5-8).
Fan Module Status/ASC Mode Indicator
Cooling fan module status for FAN 1(top) & FAN 2 (bottom).
Indicators will flash RED as a reminder when ASC mode is engaged.
System Power Indicator
System Power LED.
Disk Power Status LED
BLUE - Disk is idle
AMBER* - Disk activity (read/write)
*NOTE: Activity appears as Purple
Disk Status
OFF - Disk is idle & healthy
SOLID RED - Faulty disk
11
2
A
S
S
A
S
S
ON
CTL
CTL
ON*
ASC (Quiet Mode)
OFF
Auto Control
*
NOTE:
FAN LED indicators will flash when
ASC mode is engaged. Fan speed
will lock at 1200RPM (<20dBA).
ASC Mode
(Advanced Sound Control)
As a safety precaution, your EB800MSV2 will
generate an Alert reminder if the array
exceeds 140
o
F (60
o
C).
Figure 4
Figure 5