Pro-Ject Audio Systems DAC Box S FL - Manual (Page 2)

© Audio Trade GmbH · Pro-Ject DAC Box S FL · Revision 2013.1.15
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO DAC Box.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
!
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times. Never handle the device, the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power supply.
Never place any naked flame sources, such as lighted candles on or near the device. The product shall not
be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
!
Make all connections whilst the converter is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Never use any other power supply than the one supplied with the unit.
Connection to the amplifier
Connect the Out socket to a line input (such as AUX) on your amplifier.
Inputs
Sources with an digital output such as a CD player can be connected to the digital inputs (coaxial and optical).
Mains power connection
Connect the low voltage plug from the power supply to the Power 9V " socket before connecting the power
supply to the mains.
Front panel controls
DAC Box S FL