Pro-Ject Audio Systems Power Box RS Amp - Manual (Page 2)

© Pro-Ject Audio Systems · Pro-Ject Power Box RS Amp · Revision 2014.4.15
2
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems Power Box RS Amp.
In order to achieve maximum performance and reliability you should study these instructions for use
carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that
the voltage in your area meets the voltage requirements printed on the device.
Never handle the device while your hands are wet or damp.
Avoid letting liquids enter the device. Never place any item containing liquid, such as a flower vase
on or near the device. Never spill any liquid on the device or cables. Never place any naked flame
sources, such as lighted candles on or near the device. The product shall not be used in damp or wet
locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connecting Power Box RS Amp
Connect the power cable to the unitand to the mains. Then use special supplied cable to connect the
Power Box RS Amp with the amplifier(s). Then the original power supply of the amplifier is no longer
required.
Make all connections whilst the Power Box RS Amp is switched off or disconnected from the mains .
Power Box RS Amp is designed only for Pro-Ject Audio Systems products with 2x48V power supply.
Amp Box DS, Amp Box DS Mono, Stereo Box RS, Amp Box RS, Amp Box RS Mono and for any future
product with 2x48V power supply. Products with different input voltage cannot be used with the
Power Box RS Amp.
!
!
!