ProTemp PT-32-TTC - Manual (Page 7)

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A FUEL SOURCE
© 2014, Pinnacle Products International, Inc. Propane Tank Top Heater User’s Manual
®
Assembly
Model 32-TTC:
Tools Needed:
– Medium Phillips screwdriver.
1. Place the tank collar bracket on top of the
center plate. Be sure the mounting bolt knob is
on bottom as shown in Figure 4
2. Insert machine screw into top hole using
Phillips screwdriver.
3. Insert 2nd machine screw into bottom hole.
This will secure the tank collar bracket to the
center plate.
Model 47-TTC:
Tools Needed:
– Medium Phillips screwdriver.
1. Insert the mounting bolt knob into tank the
collar bracket.
2. Place tank collar bracket on the swivel bracket.
3. Place the plane washer on the tank collar
bracket and then insert the support bolt.
(See Figure 5)
4. See Figure 6 on page 7 for determining burner
position options.
DO NOT adjust burner heads while heater is operating. WARNING
Regulator
Knob
Fuel Connector Nut
Machine
Screws
Mounting Bolt Knob
Tank Collar Bracket
Tip over Switch
Assembly
Swivel
Manifold
Mounting
Bolt Knob
Plane Washer
Wing Nut
Regulator
Knob
Fuel Connector Nut Tank Collar Bracket Swivel Bracket
6
Figure 4 Figure 5
Missing Parts? Please Call 800-641-6996 For Assistance