Pro-Tools EMN-510 - Manual (Page 3)

SAFETY INSTRUCTIONS
This safety page is to inform the operators of the precautions to be taken
while operating this machine. The following are a few basic guidelines to
follow, but as with any machinery good judgment and attention to safety
should be applied at all times.
1 Always disconnect power before attempting to service this machine.
2 Always wear safety glasses or other approved eye protection while operating or
servicing this machine
3 Keep all body parts and foreign objects away from moving parts. DO NOT reach into
the machine without disconnecting the power source.
4 Do not attempt to override any safety device on the machine.
5 Do not operate the machine if it has been damaged or is not operating properly.
6 Do not wear loose fitting clothing or jewelry while operating or servicing this machine.
7 Replacement parts should have the same specification and operation as the original
parts on the machine.
8 All guards and shields covers must be in place before operating the machine.
9 Before starting the machine be sure it is set up properly.
10 Make sure the machine is properly grounded.
11 The machine and work area should be kept neat and clean.
12 Do not operate or service this or any machine while under the influence of drugs or
alcohol!
QUALITY PRODUCTS MADE BY PEOPLE WHO CARE PRO-TOOLS (813) 986-9000
PAGE 3