Pro-Tools EMN-510 - Manual (Page 4)

“GODZILLA” END MILL NOTCHER
SET UP
SHIPPING
BOLTS
WHEN YOU RECEIVE YOUR GODZILLA IT WILL HAVE BEEN SHIPPED ON PALLET.
REMOVE THE CARDBOARD BOX THAT IS COVERING THE UNIT. NEXT YOU WILL
LOOSEN THE SHIPPING BOLTS. IT IS RECOMMENDED THAT YOU USE A FORKLIFT
TO PICK UP UNIT AND MOUNT EITHER ON STAND OR TABLE. PICK UP UNIT AS
INDICATED BY THE RED ARROWS. IT IS ALSO RECOMMENDED THAT YOU USE
STRAPS TO SECURE UNIT TO FORKLIFT TO PREVENT TIPPING. WHEN UNIT IS
IN PLACE SLIDE OFF FORKS AND ONTO MOUNTING SURFACE.
QUALITY PRODUCTS MADE BY PEOPLE WHO CARE PRO-TOOLS (813) 986-9000
PAGE 4