PulseTech 390PT 6V and 12V Battery Tester (741X390) - Manual (Page 2)

800-580-7554 2
Test Procedures / Operating Instructions
IMPORTANT:
1. For testing 6 and 12 volt batteries, and for testing 12 and 24 volt charging systems.
2. Suggested range of operation 32ºF (0ºC) to 122ºF (50ºC) in ambient temperature.
WARNING:
1. Working in the vicinity of a lead acid battery is dangerous. Batteries generate explosive
gases during normal battery operation. For this reason, it is of utmost importance, if you
have any doubt, that each time before using your tester, you read these instructions very
carefully.
2. To reduce risk of battery explosion, follow these instructions and those published by the
battery manufacturer and manufacturer of any equipment you intend to use in the vicin-
ity of the battery. Observe cautionary markings on these items.
3. Do not expose the tester to rain or snow.
Personal Safety Precautions
1. Someone should be within range of your voice or close enough to come to your aid when
you work near a lead acid battery.
2. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing
or eyes.
3. Wear safety glasses and protective clothing.
1
2
3
4
5
LEGEND
1. LCD Display
2. UP/DOWN Button
3. ENTER: function selection/
confirm choice
4. Positive Clamp (RED, +)
5. Negative Clamp (BLACK, -)