PulseTech QuadLink 4-Channel Battery Charge Distribution System (100X004) - Manual (Page 8)

PRODUCTS & ACCESSORIES
12V Xtreme Charger w/Pulse Maintenance
Ideally suited for AGM and Maintenance-Free
batteries. Increases the duty
and life cycle of all 12V
batteries up to fi ve
times longer.
Part #: 100X010
Model: XC-100-P
Quick Mount Wall Bracket
Part #: 100X808
Model: XC-QM
Full Enclosure Wall Bracket
Part #: 100X810
Model: XC-BKT
12V 2-Channel Charger w/Pulse Maintenance
Double the charging capabilities
of the popular XC-100-P
Xtreme Charge® 12V
Battery Charger. Each
station charges at a 2.5 A
(5 A effective) charge rate
at over 14.8V.
Part # 100X200
Model: X2
QuadLink™ 4-Channel Battery Charger Multiplier
Turns any 6/12V battery charger
(using the standard 2-prong
output connector) into a
4-station maintenance charger.
Part # 100X004
Model: XC-QL4
Battery Lead with Clips
This 7.5-amp fuse-protected cable is
supplied with a quick-disconnect
terminal. Lead is 2 feet long.
Part #: 100X827
Model: XC-CLIPS
“Leave-On” Battery Lead with Lugs
Xtreme Charge® 7.5-amp fuse-protected cable
comes with a quick-disconnect terminal.
Lead is 2 feet long.
Part #: 100X830
Model: XC-LUGS
5' and 25' Extension Lead
Extend a standard lead by 5 or 25 feet with these
extensions. They feature quick-disconnect
terminals on both ends. Lead is 5 feet
or 25 feet long.
Part #: 100X805
Model: XC-EXT-5
Part #: 100X825
Model: XC-EXT-25
Quick Battery Tester
Assess your 12V battery’s state of charge
quickly with this pocket-sized tester.
It will be the most used tester in shops,
garages and any areas where battery
checks are performed.
Part #: 100X822
Model: XC-822-TEST
TO PURCHASE ANY OF THESE ITEMS, VISIT WWW.PULSETECH.NET
998XM104 04/11