4configurationofelectronicsfence, 1rectangleelectronicsfence, 4 configuration of electronics fence – RearviewSafety RVS-MDVR User Manual
Page 32: 1 rectangle electronics fence
31
3.4 Configuration of electronics fence
Introduction of functions
1.
Rectangle/polygon area alarm
2.
Circuit shift alarm
3.
Area/within circuit speed(overspeed, low speed) alarm
State: 1. There is some deviation between google China map and the real geographic position, so when
you draw” customized map”, you need to shift the map in the mode of “satellite” and operate; foreign
users can draw lines on the map directly.
2. When customizing electronics fence/circuit shift, the compatible DVR info is not deleted. If users want
to cancel functions of customizing electronics fence/circuit shift alarm, they need to log in CMS PC client
and close “electronics fence/circuit shift alarm” in vehicle configuration.
3. Each device can only customize one electronics fence alarm and one circuit shift alarm. The default
setting is to save the last info of configuration parameter for electronics fence/circuit shift alarm.
3.4.1 Rectangle electronics fence
To add
1. Click one time the icon
on the upper left of the map or to right click and choose” Adding rectangle”,
like the picture below: