Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo - Manual (Page 6)

PAGE 6 OF 8
SamsonRope.com | Email [email protected] | Tel +1.360.384.4669
Double Braid Class II Eye Splice Modified for TS-II Turbo
S A M S O N S P L I C I N G I N S T R U C T I O N S
at ta C h I n g D C g a r D C o V e r
Slide DC Gard over
splice area.
Unbraid 1 fid length of the DC Gard and divide into 4 equal groups
Insert the strand groups on the sides of the splice into a tubular fid
pass them between the splice and the DC Gard cover a distance
of 3/4 of a fid length and exit through the DC Gard cover. Trim DC
Gard strand group ends flush with DC Gard Cover where they exit.
10 A
10 B
10 C
3/4 fid length
DC Gard
Slide over
Trim
DC Gard strand group positioned on the bottom of splice is passed
between the legs of the eye and through the inside of DC Gard cover
on opposite side exiting through 3 picks down from the vertex.
Remaining DC Gard strand group will pass through the eye in the opposite direction from
the first group and through the inside of the DC Gard cover on the opposite side exiting 3
picks down from the vertex.
10 D
10 E
10
step