Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo - Manual (Page 7)

PAGE 7 OF 8
SamsonRope.com | Email [email protected] | Tel +1.360.384.4669
Double Braid Class II Eye Splice Modified for TS-II Turbo
S A M S O N S P L I C I N G I N S T R U C T I O N S
Milk DC Gard cover down from
eye the toward working end.
Tape 6 inches tightly at the throat of splice and 12 inches at base of DC Gard cover.
Seize twine over taped area.
See page 189 for more information on seizing.
10 G
10 H
10 I
Milk down
6" 12"
Apply two-part urethane over seized area.
10 J
Finished seizing Finished seizing
Finished splice
Begin tucking DC Gard strand groups over 2 strands and under 3 strands (1 tuck) and
complete 4 tucks. Bury the remaining length of strand groups between DC Gard cover and
rope a minimum of 1/2 a fid length, trim DC Gard strand group flush with cover. Turn rope over
and repeat for the remaining strand group.
10 F
1/2 fid length
Trim