Back panel – Schiit Bifrost User Manual
Page 5
IN
OUT
upgradable
discrete
24/192
32 bit D/A
SCH04E
000001
230VAC 12W
caution: risk of electric
shock
— do not open.
no user serviceable
parts inside
3 Optical Input. Use a
standard Toslink cable
to connect to the opti-
cal input. If you’re using
an Apple computer,
you’ll need a Toslink
with a 1/8” (3.5mm)
plug on one side, and
a standard Toslink on
the other.
1 RCA Outputs.
Connect these to your
preamp, headphone
amplifier, or integrated
amplifier. Not too
tough, huh?
2 Coaxial Input.
Connect your coaxial
output source with . . .
wait for it . . . a coaxial
cable! Very exciting.
BACK PANEL
4 USB Input. Or not.
If you don’t have the
USB card installed, this
input will be covered. If
you do, use a standard
USB A-B cable to
connect.
5 Power Switch. Up
is on. Down is off. It
doesn’t go sideways.
6 AC Input. Plug the
power cord in here.
Plug the other end into
a wall outlet of the
correct voltage. Trying
to run a 115V unit on
230V will result in a
blown fuse, no music,
and a void warranty.
1
2
3
4
5
6
bifrost owner's manual 2.0.indd 5
1/22/13 12:49 PM