Schiit Bifrost - Manual (Page 6)

Sampling Rates: up to
24/192 for all inputs; all
modes except 176.4 for USB
Analog Stage: fully
discrete, JFET differential
Output Impedance: 75 ohms
Frequency Response:
2Hz-100KHz, -1dB
Maximum Output: 2.0VRMS
THD: <0.006%, 20Hz-20KHz
S/N: >105dB
Upgradability: Modular USB
Input Card and DAC/Analog
Card
Power Consumption: 12W
Size: 9 x 6.75 x 2.25”
Weight: 5 lbs
FAQ SPECS
My Windows computer doesn’t see the Bifrost via USB?
You’ll need to download the drivers for Bifrost. Go to
schiit.com/drivers and enter your serial number to download them.
How do I install the Windows USB drivers?
Follow the instructions at schiit.com/drivers.
I installed the USB drivers, but Windows still doesn’t
see the Bifrost—what’s up?
Microsoft. Microsoft is up. The ways of Microsoft are varied and
fickle. Email us and we’ll see if we can help.
I don’t get any sound from Bifrost! That’s really zen-like,
but it’s not what I was expecting.
Are your sources on? Check those first. If you’re using a computer
source, ensure that your computer’s sound output is set to go to
the Bifrost via SPDIF or USB.
Can I leave Bifrost on all the time?
Sure, if you want to. It won’t hurt anything.
It doesn’t turn on, what do I do?
Plug it in to a different AC socket. Ensure you are not currently in a
blackout. Then email us if it still doesn’t turn on.
bifrost owner's manual 2.0.indd 6 1/22/13 12:49 PM