SOLIS Grinder Scala - Manual (Page 10)

10
Operating instructions
Before using
General information
Safety information
Please read the information below very
carefully. It contains important tips for the
use, the safety and the maintenance/care of
this appliance. Please keep these operating
instructions for subsequent reference.
- Do not plug the appliance in before
checking that the voltage indicated on the
rating plate is the same as the mains
electricity supply voltage.
- Clean the appliance with a dry or slightly
damp cloth only.
- Repairs are to be performed only by
authorized service offices (e.g. SOLIS
customer service). Inexpertly repaired
appliances are a source of risk to the user.
- Solis will not accept any liability for
damage or injury if the appliance is used
other than for its intended purpose or is
improperly operated or inexpertly repaired.
All guarantee claims will be void.
- Do not use the appliance if the power
cable is defective.
- Never remove the plug from the power
supply socket with wet hands, or by
pulling on the power supply cord.
- Children cannot always recognize the
dangers of using electrical equipment.
Therefore, never leave them alone and
unsupervised with electrical appliances.
- Do not immerse the appliance in water.
- Caution: Always unplug the mains supply
cord prior to cleaning the appliance.
Initial Operation
It is
important to keep the cord short.
Setting the grinding control
If the appliance has been filled with
coffee beans, the grinding control must
only be operated when the motor is
running.
Place the appliance on a level surface.
Unreel the required length of cord.
Insert
the cord into the power cord inlet provided
so that it is clamped and insert the plug into
the socket outlet. Pack the excess cord
length in the cord-tidy (fig. 1). Open the lid of
the bean container (fig. 2), fill the bean
container with the desired quantity of coffee
beans (250 g max.) (fig. 3) and close the lid
(fig. 4). The appliance is now ready to
operate.
The main adjustment positions stated on the
control for the degree of grinding are
normally sufficient. The degree of grinding
can be adjusted by twisting the bean
container (fig. 5).
= fine grinding (e.g. for espresso coffee
machines)
= medium grinding (e.g. for filter coffee
machines)
= coarse grinding
If the three adjustment positions do not
precisely match your personal taste you can
also grind your coffee by choosing any
intermediate position.