SOLIS Smart Heater - Manual (Page 10)

18 19
USER MANUAL
Please read carefully these instructions before attempting to assemble, install, use or maintain the fan heater.
Protect yourself and others by observing all safety information. Failure to comply with instructions could
result in personal injury and/or property damage. Retain these instructions for future reference.
GENERAL SAFETY INFORMATION
• Do not use the appliance for other than its intended use. This appliance is intended
for household use only.
• This product is not a toy. Children would be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
• Disconnect from mains when not in use or when cleaning.
• To disconnect heater, turn switch to off position, then remove plug from outlet. Pull only by the
plug. Do not pull on the cord when disconnect heater.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening
as it may cause an electric shock or fire or damage the heater. Do not block or tamper with
the heater in any manner while it is in operation.
• Do not use the appliance with a damaged cord or plug. If the supply cord is damaged,
it must be replaced by the manufacturer or by a service agent authorized by Solis in order
to avoid a hazard.
• It is not recommended to use an extension cord.
• The heater is hot when in use. To avoid burns, do not let bare skin touch hot surface.
Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains
at least 0.9m from the front of the heater and keep them at least 0.3m from the sides and rear.
• Do not immerse cord, plug or any part of the appliance in water or any other liquid.
• Do not use the heater in dusty environments or where flammable vapours are present
(e.g. in a workshop or garage).
• Do not place the heater on or near any other source of heat.
•
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER.
• A fire may occur if the heater is covered with or touches flammable material, including curtains,
drapes, bedding etc. when in operation.
KEEP THE HEATER AWAY FROM SUCH MATERIALS.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not place heater on
soft surfaces, like a bed, where openings may become blocked.
• Always place the heater on a stable, flat, level surface when operating, to avoid the chance of the
heater overturning. Locate the power cord so the heater or other objects are not resting on it. Do
not run power cord under carpeting. Do not cover power cord with throw rugs, runners, or the like.
Arrange power cord away from room traffic and where it will not be tripped over.
• Do not use the heater in the immediate surroundings of bathtubs, showers, washing stands
or swimming pools.
• Do not locate the heater below a socket-outlet.
• Do not let the mains lead hang over the edge of the table or work surface or touch hot surfaces.
• Do not use outdoors.
• Do not attempt to repair, disassemble or modify the appliance. There are no user-serviceable parts inside.
• WARNING: Do not use this heater with a programmer, timer or any other device that
switches the heater on automatically, since a fire risk exists if the heater is covered or
positioned incorrectly.
• When the heater is turned on for the first time, it may release a slight, harmless odor. This odor is
a normal occurrence caused by the initial heating of the internal heating elements and should not
occur again.
• Please do not put any unit on the product.
• In order to avoid any accident, please turn off the unit when people leave.
• Please do not use the product when there are no people to take care of children, animal or the disa-
bled people.
• If do not use the product for a long time, please disconnect the plug, put the product into the box
and stock the product in a dry and ventilated place
• When using the product, please do not make the air outlet and inlet next to the wall or curtain to
avoid obstructing the air and influence the effect.
• Please do not use the product under the direct sunshine.
• The inflammable or explosive article is not allowed to put around the heater. And the product is not
allowed to use in the environment filled inflammable air or dust.
• Please do not make the power cord touching the net cover in order to avoid the high temperature
hurts the power cord.
• Do not make the wet clothes hang above the heater, in order to avoid the dropped water make the
product creepage.
• The power supply, voltage and frequency must comply to the main technical request of heater.
• The ammeter and the internal line used must bear the using frequency of heater, and also take into
account that the other electrical appliance can be used at the same time.
• If the power cord is hurt or the product has defect, please do not disassemble the product, or repla-
ce the spare parts that cannot comply to the safety request by yourself. You can contact with our
company’s after-sale service to get help.
• We recommend the installation of a residual current circuit-breaker to provide additional protection
when using electrical appliances. It is advisable to use a circuit-breaker with a nominal fault current
of maximum 30 mA. Your local electrician can advise you.
WARNING:
DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER.
WHEN SERVICING OR MOVING THE HEATER, ALWAYS UNPLUG THE POWER CORD.
Solis_Smart_Heater_Betriebsanleitung.indd 18-19 08.04.10 17:16