SONiVOX Wobble - Manual (Page 3)

3
Installation
Important: If you are using a version of Wobble that is older than Wobble 2.0, this installation
will not overwrite or uninstall that version. Also, any files you use or save with either version are
neither backward-compatible nor forward-compatible—you cannot use files from Wobble 1.0
with Wobble 2.0 and vice versa.
Windows
1. Right-click the .zip file you downloaded and select Extract All.
2. Follow the on-screen instructions. By default, Windows will show you the extracted files
when it has finished extracting them.
3. Double-click the .exe installer file
4. Follow the on-screen instructions.
Note: Wobble uses PACE copy protection, so it will install the PACE InterLok driver on your
system if you do not already have it. As most audio software uses PACE copy protection,
though, this is probably already installed on your system.
Mac OS X
1. Double-click the .zip file you downloaded. The archive utility will extract the files and put
them in a folder in the same location as the .zip file.
2. Open the Wobble folder.
3. Double-click the .pkg installer file.
4. Follow the on-screen instructions.