SONiVOX Wobble - Manual (Page 9)

9
Click the Save button (disk icon) to save a file:
• Save SVX File: Select this to name and save your
current Patch (.svx).
• Save MIDI Learn: Select this to name and save your
current MIDI Learn Preset (.sml).
• Save Default MIDI Learn: Select this to save your current MIDI Learn settings as the
default.
• Save Pattern Preset: Select this to name and save your current Pattern Generator
settings as a Pattern Preset (.spg).
Important: The Pattern Presets do not save the Pattern Generator's On/Off button state,
nor do they save the IRC value. These values are saved only with your DAW's project.
See the Using Patches and Using Pattern Presets section for step-by-step instructions of
how to use these controls.
MIDI Learn Button
Wobble's MIDI Learn feature lets you to assign or "map" Wobble's knobs to any
hardware MIDI controller. To do this:
1. Click the Learn button to enter Learn Mode, which lets you to assign hardware
MIDI controls to Wobble's parameters.
2. While in Learn Mode, adjust a parameter in Wobble and then move a knob or slider on
your hardware MIDI controller. That knob or slider will now control that parameter.
3. Click the Learn button again to exit Learn Mode.
To "unlearn" an assignment, see the Remove section in this manual's MIDI Learn section.