Taylor-Wharton KeepFull Telemetry System - Manual (Page 10)

Explanation of User Menus
At the bottom of this screen there are six choices for
viewing tank information and making changes to system
parameters. Click on each to view its features and
functions.
Change Request: This screen allows changes to tank
and sensor parameters. Upon receipt of a change request
“DataQwest” technicians will change the parameters.
Configuration: As shown above this screen gives
general tank and sensor information.
Events: Product deliveries and other important events are
displayed, with information about the time of their occur-
rence and the tank level afterwards.
Historical Data: Historical data showing product usage
and replenishment is display along with fill levels and
alarm points.
Site Summary: As shown above this screen lists the tanks
that are located at a particular site.
Site Directory: As shown above this screen lists the
States where tank sites are located.
Alarms
When product level falls below a “critical point” the telem-
etry unit will within the hour transmit an alarm to the Web
site. A predetermined contact in your organization will
immediately be notified by E-mail or Fax.
Part Numbers
Two different telemetry units cover a differential pressure
range from 0 to 600 inches of water. Order Taylor
Wharton’s part number 5740-8800 to receive a unit that
spans the range from 0 to 325 inches of water. For 0 to
600 inches of water order part number 5740-8825.
Trouble Shooting
If erratic or erroneous readings are indicated check all
pressure connections for leakage. Repair any leaks. If the
unit still is displaying false readings or no leaks are found,
call Taylor Wharton Customer Service.
Warranty and Service
For warranty and service call Taylor Wharton Customer
Service
: 1-800-TW-TANKS.
10