Just recorded, Successive cd synchro-recording of another cd, To pause recording – Sony MDS-501 User Manual
Page 31: To check the remaining time on the disc, Press immediately after finishing recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Just Recorded
3
Press STOP to stop recording.
Recording stops.
Do this procedure to immediately playback tracks that have
just been recorded.
Successive CD synchro-recording of another CD
Follow the procedure below in place of step 8.
1
Press ■ on the remote commander of the CD player.
2
Change the CD.
3
Press ► on the remote commander of the CD player.
Synchro-recording restarts.
To pause recording
Press STANDBY or CD PLAYER/ I I .
Press START or CD PLAYER/ I I to restart recording.
A new track number is created each time you pause
recording.
To check the remaining time on the disc.
Press DISPLAY (see page 26).
■ONV
J ©
Q op 03
> 1 ■ I • i ia-fc
Press immediately after finishing
recording.
Playback starts from the first track just recorded.
00n 01s
I
Notes
I
Place the CD player close to this recorder
As the same remote commander controls both the CD player and the
recorder, you may have trouble operating both units if they are far
from each other.
If "Protected" appears in the display window
The disc is record-protected. Close the slot to record on the disc (see
page 24).
When "TOC" flashes in the display window
Do not jog the recorder or pull out the power cord.
When recording from digital sound sources
The recorder records track numbers in the same sequence as the
sound source (i.e., based on changes in the emphasis data).
Playing back from the first track of the disc
after recording
1
Press ■ while the recorder is stopped.
2
Press ► or I I .
Playback starts from the first track of the disc.
31