Sony HCD-241 - Manual (Page 18)

Playing in a Desired Order ~ Program Play
4
Press O- to start playback.
O
>
I tv
Skipping to the next seiection programmed
Press »1 during playback.
Going back to the beginning of the seiection being
piayed
Press 1« during playback.
To stop program piay
Press ■. The last selection number programmed will be
displayed.
To resume playback, press t>. Play begins from the
beginning of the program.
You can play the same program repeatedly as long as you do
not cancel program play or erase the program.
To program whiie observing the disc iabeis
You can program the selections with the disc table open.
To check the program contents
Press the CHECK button. Each time the button is prc*ssed,
the program contents are displayed in the programmed
order.
To cancei program piay
Press CONTINUE and return to the continuous playKick
mode. The program will be erased.
To cancei aii the seiections programmed
Press ■ to cancel in stop mcxie.
If the disc table is opened or the pt>wer is turned off, the
program contents are also erased.
To program for recording
After steps 1 to 3-A or 3-B3), press II to insert a pause and
program the selections for side B bv performing step 3-A U>
3-B3).
When the selections for side A have been played, the unit
will pause. ("B" lights up.)
Set the tape to the beginning of side B, then press I> or II.
The selections for side B will start playback.
Notes
• The playing time for selection numbers higher than 20 will
not be added into the total playing time.
• When selections have been programmed for sides A and B,
the display shows the selections programmed for side B
and the total playing time for side B in stop mode.
18