Connecting the ac power cord, Using the player on batteries, Note – Sony CFM-10 User Manual

Page 4: Choosing power sources, Specifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Choosing Power Sources

Rear Panel

Connecting the AC power cord.

Open the batterv compartment and take out the

AC power cord. An opening in the compartment
door permits AC operation with the door in its
place. Then, connect the AC power cord to the
wail outlet.

to a wail outlet

Using the player on batteries.

Insert four size D (R20) batteries (not supplied)
into the batterv compartment.

Note

Replace the batteries v\ hen the OPR/ BATT indicate)!' dims or v\ hen the player stops

operating. Replace all the batteries with new ones.

Specifications

' Frequency range 1-M: 87.6-108MH/./A.M: 330-

l,710kH/

> Antennas FM: Telescope ontonna/AM: Buiit-in

territe bar

- Recording system 2-track, mt>no
' Frequency response U)0-8,0(X)Hz
' Speakers ITill-range; 7.7ctn (3V>tinches) dia x 1
' Power output 0.9W (at 10"o harmonic distortion

in

LX.'

operation)

‘ Battery life

FM recording

Semy K20i'’; Approx. 24 ht^urs

Sony I.R20 alkaline : Approx. 55 ht)urs

Playback____________ ________________ _____

Sciny R20P ; Approx. 20 hours

Sony LR20 alkaline : Approx. 50 h<nirs

• Power requirements

120V AC, 60H//8V LX ,

four size D (R20) batteries

• Power consumption

AC5W

• Dimensions

Approx. 272 x 130 x 121.5 mm(w/h/

d)( lOV-i .V 5'/^ X 4’/

k

inches) ind. projcx'ting parts

and controls)

• Mass

.Approx. 1.7kg {31b 12oz}{ ind. batteries)

Design and specifications are subject to change
without notice.

Advertising