Sony SAT-A55 - Manual (Page 24)

Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)
Selecting an Antenna Type
The Antenna Type display lets you or your professional installer enter
which type of Satellite Dish Antenna you use. After you have entered
your antenna type, you can use the Antenna Location pop-up to help aim
your anterma.
1 Highlight and select "Antenna Type" from the Antenna
Display.
The Anterma Type display appears.
^ Vienna
Round ^
Signal Seek«-: On
C OïilMll ^
2 Highlight and select the Satellite Dish Antenna type that
you have installed.
The SignalSeeker pop-up appears if you have selected "Round".
Skip to step 4 if you selected "Oval 2-Sat" or "Oval 3-Sat".
*9'Tip
Selecting "off" in the SignalSeeker
pop-up may allow you to see the
Signal Strength Meter if you use a
diplexer or cerbdn other accessories
with your Satellite Dish Anterma.
Note
The SignalSeeker feature is available
only with the Round Anterma. Refer to
your Satellite Dish Anterma
Installation Instructions for more
information about this feature.
3 Highlight and select "On" if you selected "Round".
The SignalSeeker pop-up closes to show the Antenna Type display.
f Anlf-nna T>pe
lfOVIS«M.«4fpfi
V fioiKid CSEi
Signal Setter: On ‘ L
P 0«aI!-Sjl 4^
^ 0val>-S3t
m
4 Select "Return".
The Antenna Type display closes to show the Antenna display.
24