Sat-a55 back panel – Sony SAT-A55 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SAT-A55 Back Panel
[T]
ACCESS CARD slot
Do not remove the Access Card unless instructed
to do so by your service provider.
SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
d] RF REMOTE jack
Inputs remote control signals using the RF
Antenna.
[
4
] CH3/CH4 switch
When you use an RF cormection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
charmel on which programs from the Digital
Satelhte Receiver can be viewed.
[UVHF/UHFIN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
d] AC IN jack
Inputs AC power from a power outlet using the
AC Power Cord.
[
7
] TEL LINE jack
Connects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
¡8}
VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial
cable.
[9] AA/ OUTPUT jacks
Output audio and video signals to your TV and
other audio/video equipment using A/V cables.
m LOW SPEED DATA
Can be used for future products such as Personal
Video Recorders.
01] VCR CONTROL jack
Allows the VCR Controller to control a VCR and/
or cable box. Also cillows connection of a
monaural cable for use with Sony SmartFile
VCRs.
01
DIGITAL OUT (OPTICAL)
Outputs digital audio signals to the digital optical
input of your audio receiver.
O
n
o'
P)
ft
o
3
69