Sony ICF-SW7600 - Manual (Page 6)

Power Sources
Before installing the batteries, be sure to check that tne MW CH
STEP selector is set correctly (see page #). For the customers In the U.S.A.
Use the supplied AOD4M AC power adaptor.
1
to DC IN 6 V
For the customers in Canada
Use the supplied AC-240 AC power adaptor. The adaptor operates
on either 110 (99-121)* *, 120 (108-132), 220 (198 - 242), or 240 V
(216 - 264 V) AC, 50/60 Hz.
* Range of voltage allowable shown in parentheses.
1
Before connecting the adaptor to a wall
outlet, check to see that the input
selector is correctly set to your local
Battery replacement
Replace all the batteries with new ones when the sound becomes weak or
distorted.
Do it within ten minutes since the preset statior« and the current time will be
erased when more than ten minutes have passed.
If they are erased, preset the stations and set the time again.
Notes
• Keep the batteries installed for the built-in computer back-up even if you
use the external power sources, if you don't, the preset stations and current
time will be erased.
• The irttemal batteries are automatically disconnected when the AC power
adaptor or the car battery cord is connected to the DC IN 6 V jack.