Sony CPD-15SF1 - Manual (Page 4)

Getting Started
Before using this monitor, piease make sure that the
foilowing items are inciuded in your package: Multiscan
15sf/17sf monitor (1), power cord (1), warranty card (1) and
this operating instruction manual (1).
This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability. Although
this monitor will sync to other platforms running at horizontal
frequencies between 31.5 and 64 kHz, including Macintosh
and Power Macintosh system, a cable adapter is required.
Piease consult your dealer for advice on which adapter is
suitable for your needs.
Step 1: With the monitor switched off, attach the power
cord to the monitor and the other end to a power
outlet.
Using Your Monitor
step 2: With the computer switched off, attach the video
signal cable to the video output.
IBM or compatible computer
to video output
Apple computer
1 0 1
1 i
{
000(=>
J
Jlil
to video
Step 3: Turn on the monitor and computer.
Step 4: If necessary, adjust the user controls according
to your personal preference.
The installation of your Multiscan 1Ssf/17sf is complete.
Enjoy your monitor.
Preset and User Modes
The Multiscan 15sf/17sf has factoiy preset modes for the 6
most popular industry standards for true ‘^lug and play”
capability.
For less common modes, the Multiscan 15sf/17sfs Digital
Multiset Technology will perform all of the complex
adjustments necessary to ensure a high quality picture for
any timing between 31.5 and 64 kHz.
NO. Resolution (dots x lines) Horizontal Frequency Vertical Frequency Graphics Mode
1 640x480 31.5 kHz 60 Hz VGA Graphic "
2 800x600 46.9 kHz 75 Hz VESA»
3 832x624 49.7 kHz 75 Hz Macintosh 16” Color»
4 1024x768 48.4 kHz 60 Hz VESA»
5 1024x768 60.0 kHz 75 Hz VESA»
6 1280x1024 64.0 kHz 60 Hz STD CAD/CAM
Note: For Windows 3.x users, check your video board
manual or the utility program which comes with your
graphic board and select the highest available refresh
rate to maximize monitor performance.
Recommended horizontal timing conditiona
Horizontal sync width should be: >1.0 psec.
Horizontal blanking width should be: >3.0 psec.
1) VGA is a trademark of IBM Corporation.
2) VESA is a trademark of the non-profit organization. Video
Electronics Standard Association.
3) Macintosh is a trademark of Apple Computer Inc.