Entering new timings, Do o, O ; o c – Sony CPD-15SF1 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Geometry
Color Temperature
Press \1/
«-CZD
'I
GEOM
Pincushion (Bowing of the sides)
CSD
o ; O C
CU
Raster Rotation
Resetting
DO
o
Press the RESET button to recall the
factory settings for brightness, contrast,
horizontal etnd vertical size, center and
pincushion for the mode currently in
use.
Press and hold the RESET button for
2
seconds to recall factory setting for all
adjustments in all modes.
Press
COLOR
Preset color temperature
cxj
O (
^^ 9300K
(Reddish)'——“^
^ (Bluish)
CID
Monitor is initially set to 9300K.
User adjustable color temperature
OD
9300K
o (
)
SOOOK
You can choose between the two factory preset color
temperatures or adjust the color temperature to your
preferences within a range of 5(X)0 K - 93(X) K.
Your most recent adjusted color temperature will be recalled
by pressing o or o button.
Entering New Timings
When using a video mode that is not one of the 6 factory
preset modes, some fine tuning may be required to optimize
the display to your preferences. Simply adjust the monitor
according to the preceding adjustment instructions. The
adjustments will be stored automatically and recalled
whenever that mode is used.
A total of 10 user-defined modes can be stored in memory.
If an 11th mode is entered, it will reolace the first.