Sony CDX-C460 - Manual (Page 14)

Locating a disc by name
— List-up (CD changer with custom file
function or MD changer)
You can use this function with discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 13).
1
Press ( LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
L5T
I 3 C H U B E R T
2
Press
C list )
repeatedly until you find the
desired disc.
3
Press
(T)
(ENTER) to play back the disc.
Notes
• Ofitv a disc name has kvu displaifcd for five iit’auuis, i/if
display i^oes hack to its normal pdai/bnck mode. To turn
off the display, press
(^PL).
• The track names arc not displayed during MD playback.
• If there are no discs in the inai^azine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file, "********"
appears in the display.
• If the disc information has not been read by the unit,
"NOT READ" appears in the display. To load the disc,
first press the number button, then choose the disc that
has not been loaded.
• The information appears only in upper case. There are
also some letters which cannot be displayed (during MD
playlmck).
Selecting specific tracks
for playback
— Bank
(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start plavino the disc and press ( shift ).
Then press (T) (PLAY MODE) for two
seconds.
Bank edit mode
CUE
PLR^
14
Note
If you hälfe not labeled the disc, the bank edit mode
does not appear and the program edit mode appears. To
go back to the normal playback mode, press (^ hift ).
2
Press either side of ( seek / amsi to select
the track number you want to skip and
press (D (ENTER).
r Tl T
(_ ifC ^
3 5 H I P
The indication changes from "PLAY" to
"SKIP." If vou want to return to "PLAY,"
press
CE) (ENTER) again.
3
Repeat step 2 to set the "PLAY” or “SKIP"
mode on all the tracks.
4
Press
(5)
(PLAY MODE) for two seconds.
The unit returns to the normal CD playback
mode.
5
Press
CSHiFTY.
Notes
• You can set the "PLAY" and "SKIP" mode on up to 24
tracks.
• You cannot set the "SKIP" mode on all the tracks.
Playing the specified tracks only
You can select;
• BANK-ON to play the tracks with the
"PLAY" setting.
• BANK-INV (Inverse) to play the tracks with
the "SKIP" setting.
1
During playback, press ( shift ), then
press ( f ) (PLAY MODE) repeatedly until
"BANK" appears.
2
Press
(T)
(—
♦)
repeatedly until the
desired setting appears.
BANK-ON------► BANK-INV------► BANK-OFF-i
- 71 T
. JJC
BRUH-D!
Playback starts from the track following the
current one.
3 Press (SHIFT).
To go back to the normal playback mode,
select "BANK-OFF" in step 2 above.