Sony SA-VA1 - Manual (Page 12)

Adjusting the Audio
Use the audio adjustment functions described below to adjust the volume, balance and delay
time of the speaker system.
ACTIVE SP6AK6B
IS CENTER LEVEL buttons
In DOLBY or DOLBY PRO LOGIC modes (see page 14),
press CENTER LEVEL + or - to adjust the volume of the
center speaker over a range of +10 dB to -10 dB, in 1 dB
steps.
Œ3
CENTER
LEVEL
CZ
3
Remote commander
(1 REAR LEVEL +/- buttons
In DOLBY or DOLBY PRO LOGIC modes, press REAR
LEVEL+ or - to adjust the volume of the rear speakers
over a range of+10 dB to -10 dB, in 1 dB steps.
REAR
LEVEL
ŒD
Remote commander
IS S.WOOFER +/- buttons
When the super woofer speakers are active (see page 11),
press S. WOOFER + or - to adjust the volume of the super
woofers over a range of +10 dB to -10 dB, in 2 dB steps.
|D| BASS +/- and TRE *1- buttons
Press BASS + or TRE + to increase the bass or treble of
the front and center speakers, and BASS - or TRE - to
reduce the bass or treble of the same speakers over a
range of +10 dB to -10 dB, in 2 dB steps.
m CEi
BASS TRE
CZD (ZD
Remote commander
H TEST TONE button
In DOLBY or DOLBY PRO IXX j IC modes, pressing the
TEST TONE button causes a test tone signal to be
sequentially output from each speaker, allowing you to
adjust the sound level of each speaker to achieve a
balanced sound image.
1 Press MASTER VOL (VOLUME)+/-to select the
sound volume that you commonly use.
Q
VOLUME
Q
Operation panel Remote commander
-O MASTERVOl O *
LU
SWOOFER
ŒÎ
Remote commander
12