Clarity Pal - Manual (Page 30)

30
Operations
Making a call
The icon on the top left corner of the
LCD indicates the signal strength.
There are three methods to make
a call.
• Phonebook — Find the number to
dial, then press the dial key.
• Call history — Enter the list of
missed calls, received calls or dialed
calls, then choose the record, press
the dial key
.
• Manual — In idle mode, you can
input the number by numeric keys,
then press the dial key.
Dialing status
Enter the dialing status. The signal
strength and other icons will be dis-
played when dialing. A “blicking” stick
indicates the location of the cursor.
Steps for inputting the number:
Step 1:
Delete the character before
the cursor.
Step 2:
Dial the number by using the
dial key.
Step 3:
Press * key twice to input
“+”, which can be used to
make international calls. Press
Signal strength
* key three (3) times to input
“P”, which can be used for
DTMF functions.
Connecting status
After dialing the number, the LCD will
display signal strength and battery indica-
tions. If the number is not in the phone-
book, the number will be displayed —
otherwise the name will be displayed.
Calls outside local service area
The simpliest method to make a call is
to input the number by numeric keys,
then press the dial key. If you make an
mistake, touch the M3 key to clear
the error
.
• To make calls out of your local service
area, enter the area code, followed by
the phone number, and then press the
dial key.
• After dialing the number and press-
ing the dial key, a “calling” message
will display on the LCD.
• Short Press the Power Key to end
or abort the call.
Calls to extension numbers
Some fixed phone numbers to not allow
direct access. If so, dial the switchboard
number, then the extension number.
Insert “P” between the switchboard
number and extension to complete
the call.
[Area code] + [swithboard num-
ber] + [P] + [extension number]
+ [dial key]