Clarity Pal - Manual (Page 42)

42
Network setting
• Network selection
– New search
– Select network (Automatic)
– Selection mode (Automatic/Manual
Security settings
• SIM lock
Use PIN code (code is changeable) to
lock the SIM card. Security options
for the phone and SIM card can be set to
prevent unauthorized use.
PIN code can be toggled ON/OFF. If the
code is OFF, the phone will ask for it
upon powering-on.
Note:
SIM lock must be enabled before
changing PIN. If you input the PIN code
in error more than three (3) times, the
SIM card will lock. A PUK code will be
required to unlock the card. The PIN
and PUK code may be provided to you
with the SIM card. If not, contact your
network provider.
The default code is [ 1234 ].
Change it to a personal code as soon
as possible.
• Phone lock
You may choose to lock the phone to
avoid unauthorized use. However,
this requires an input of the personal
password each time the phone is pow-
ered ON.
Note:
The default phone password is
[ 1122 ] . Change it to a personal pass
word as soon as possible.
• Auto Keypad lock
Set the waiting time for locking key-
pad. After setting, the keypad will lock
auto-matically, if not used within the ap-
pointed time. Press the right “M3”
memory key, then press the “#” key.
• Change password
Change the password, including PIN,
PIN2 code, and mobile lock password.
• Changing PIN code
Select “Settings. Select “security setup.”
Select “Change password.” Select “PIN.”
Enter old PIN number. Then create a
new PIN number. Enter the new PIN
number again to confirm.
Operations