Sony DVP-S550D - Manual (Page 57)

Setting for the Signal to the Digital
Output
When vou select “ON," set "DOLBY DIGITAL“ and
“DTS."
Switches the methods of outputting audio signals when
you connect a digital component such as a receiver
(amplifier) having a digital connector, an audio
component having a built-in DTS decoder, a DAT or MD
via the DIGITAL OUT OPTICAL or COAXIAL connector
using an optical or coaxial digital connecting cord. For
details on the connection, see page 11.
■ DTS
Selects output DTS signals via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when you set "DIGITAL OUT" to “OFF."
• OFF, when the player is connected to an audio
component lacking a built-in DTS decoder.
• ON: when the player is connected to an audio
component having a built-in DTS decoder.
Note
Select the setting correctlv. Otherwise, no sound or strange
sound will come out from the speakers, attecting vour ears or
causing the speakers to be damaged.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO FILTER: SHARP
AUDIO DRC: STANDARD
TRACK SELECTION: OFF
__ DOWN MIX: DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL: D-PCM
DTS: OFF
To set. Dress SSSB. thenlENTERl,
To quit, pressisETUPj.
■ DOLBY DIGITAL
Selects output Dolby Digital (AC-3) signals via the
DIGITAL OUT OPTICAL and COAXIAL connectors. You
cannot select this item vehen vou set “DIGITAL OLT" to
"OFF."
• D-PCM (Downmix PCM): when vou play the Dolby
Digital (AC-3) sound tracks, the output audio signals
are mixed dotvn to 2 channels. With the settings of the
item "DOWNMIX" in "AUDIO SETUP," you can select
whether the signals conform to Dolbv surround (Pro
Logic) or not.
• DOLBY DIGITAL: when the plaver is connected to an
audio component with a built-in Dolby Digital (AC-3)
decoder.
• Do not play the DTS sound tracks without
connecting the player to an audio component
having a built-in DTS decoder. You cannot hear
the DTS sound unless you connect the player to
an audio component having a built-in DTS
decoder.
• When you play the DTS sound track on a CD, a
loud noise will come out from the LINE OUT
(AUDIO 1, 2), 5.1CH OUTPUT (FRONT L/R) and
PHONES connectors, affecting your ears or
causing the speakers or headphones to be
damaged.
• When you play the DTS sound track on a DVD,
no sounds will come out from the LINE OUT
(AUDIO 1, 2), 5.1CH OUTPUT (FRONT DR) and
PHONES connectors.
i/i
It)
3
ID 1/1
t)
3 a.
>
a.
3
It
3
Note
If the player is connected to an audio component lacking a
built-in Dolby Digital (AC-3) decoder, do not set "DOLBY
DIGITAL" in "AUDIO SETUP" to "DOLBY DIGITAL."
Otherwise, when you play the Dolby Digital (AC-3) sound
track, a loud noise or no sound will come out from the
speakers, affecting your ears or causing the speakers to be
damaged.