CyberData Part #010861 - Manual (Page 23)

Installing the VoIP Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
VoIP Loudspeaker Amplifier Operations Guide 930106C CyberData Corporation
17
2.3.3 Set up the Loudspeaker Amplifier
1. Click on the Speaker Setup button to open the Speaker Setup page. See Figure 2-11
Figure 2-11. Loudspeaker Amplifier Setup
2. On the Loudspeaker Amplifier Setup page, enter values for the parameters indicated in
Table 2-10 .
Table 2-10. Loudspeaker Amplifier Setup Parameters
Web Page Item Description
Change Web Access Username Use this field to change the Web Access Username.
Change Web Access Password Use this field to change the Web Access Password.
Re-enter New Password Use this field to re-enter a new password.
Speaker Tone Before Paging Enable/Disable the speaker tone (beep) before each page.
Speaker Tone After Initialization Enable/Disable the speaker tone (beep) after the system
startup.
RTFM Announcement
a
Enable/Disable the speaker tone (beep) and audio
associated with the RTFM switch.
VoIP Loudspeaker Amplifier