CyberData Part #010861 - Manual (Page 28)

CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide
Installing the VoIP Loudspeaker Amplifier
Set up the MGROUPS
22
3. After changing the parameters, click Save Settings.
Multicast IP Address Enter the multicast IP Address of a MGROUP.
Port 2000-65535 Enter the port number of a MGROUP.
Priority Assign the priority to a MGROUP (the higher the number,
the higher the priority).
MGROUP Name Assign an identifier to the MGROUP.
Beep Check this box if you want a beep to precede a page.
Click on this button to save your configuration settings.
Click on this button to reboot the system.
Link to the Network Setup page.
Link to the Speaker Setup page.
Link to the SIP Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
Table 2-12. MGROUPS Setup Parameters
Web Page Item Description