Sony SPP-M502 - Manual (Page 23)

Switching the phones during a call
When you put on a call on hold, you can switch between the base
phone and handset without disconnecting the call. The call on line 1
will be switched to line 1 on another phone and that on line 2 is
switched to line 2.
To switch from the base phone to the
handset
Example; While talking on line 1;
INTERCOM
lamp
1
^ 3
Press ( HOLD ) on the base
phone.
The LINE 1 button on the base
phone and handset flash slowly.
Press C LINE 1 ) on the handset.
The LINE 1 button on the
handset lights up and the LINE
1 button on the base phone
double flashes in succession.
Now you can continue talking
on the handset.
When you are done talking,
press COTF) on the handset or
replace it on the base phone.
The LINE 1 button goes off.
>
a
<
fii
3
o
n>
a.
■n
to
u
n
VI
Tip
While talking through the speakerphone on the base phone (or handset), if you
press (
LINE 1) or ( LINE 2) which is flashing on the handset (or base phone), the
conversation will be continued between the base phone, handset and outside
caller.The corresponding line button on the base phone and handset lights up,
and the INTERCOM lamp on the base phone lights up.
continued
Advanced Features 23^'