Connecting the base phone, 2 ac power adaptor (supplied), To the telephone outlet – Sony SPP-M502 User Manual
Page 9: 1 telephone line cord (supplied), L! 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the base phone
If you want to hang the base phone on the wall, see page 33.
To connect the base phone to a single outlet having two lines
l! 3
e D
To an AC outlet
2
AC power adaptor (supplied) .
O
to
3
10
in
f*
Qt
to
a.
,a:
To the telephone outlet
1
Telephone line cord (supplied)
Tip
When you connect the base phone to a single
outlet having two lines, you can connect a
computer or FAX to the "L2/DATA" jack.
To a single outlet
having two lines
1
2
3
Connect the telephone line cord
to the "LI /LI +L2" jack, and to a
telephone outlet.
Connect the AC power adaptor
to the "DC IN 9V" jack, and to
an AC outlet.
Fully extend the antenna. Make
sure it points towards the
ceiling.
Note
If you connect the base phone to single outlet
having one line, you cannot connect
computer or FAX to the ''L2/DATA" jack.
continued
Getting Started 9^"