Crestron electronic CP-X8150 - Manual (Page 23)

23
Item Description
SNMP Port Configures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address
Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Download MIB file Downloads a MIB file from the projector.
Network Bridge Port Configures the Bridge port number.
Port number
Input the port number.
Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352
between 1024 and 65535 can be set up. It is set to 9717 as
the default setting.
Click the [Apply] button to save the settings.
3.1 Projector Web Control - Port Settings (continued)
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection from
Network Restart on the main menu(&41).
NOTE
3. Web Control