Crestron electronic CP-X8150 - Manual (Page 46)

46
3. Web Control
3.2 Crestron e-Control ® - Tools window (continued)
3 Projector (continued)
Configures the network settings of the projector.
Item Description
DHCP Enables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default Gateway Configures the default gateway when DHCP is disabled.
DNS Server Configures the DNS server address.
To apply the settings, click the [Send] button.
4 User Password
Configures the User Password. To prompt the entry of User Password before
starting e-Control ® , select the checkbox.
Item Description
New Password
Configures the password.
You can specify a password up to 26 alphanumeric characters.
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Confirm
Reenter the above password for verification. If the password is
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.
5 Admin Password
Configures the Admin Password. To prompt the entry of Admin Password before
displaying the Tools window, select the checkbox.
Item Description
New Password
Configures the password.
You can specify a password up to 26 alphanumeric characters.
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
Confirm
Reenter the above password for verification. If the password is
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.