To connect the hendycam station to a tv or vcr, Attaching the ac power adaptor, To fit the camcorder to the handycam station – Sony CCD-TR500 User Manual
Page 11: For the canada model)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to a TV or VCR Using the Handycam Station
(for the Canada model)
By connecting the HSA-V500 Handycam Station (not supplied for U.S.A. model) to your TV or VCR, you can
view the playback piclore on the TV easily.
To Connect the Hendycam Station to a TV or VCR
Connect the Handycam Station to the TV using the supplied connecting cable
tf you are goiirg to connect the TV or VCR using the S video cable [a], you do not need to connect the yellow
(video) plug of the A/V connecting cable [b].
jJS-VIDEO^
VIDEO ®
[a] S-VIDEO IN
I Signal Mow
If your TV or VCR Is 8 monaural type
Connect the Handycam Station to the TV using the supplied connecting cable. For audio connection, use only
the white plug both on the Handycam Station and the TV or VCR. With this connection, the sound is in
monaural.
VIDEO ®
"T
AUDIO
0
I :Signal flow
If your TV does not have video/audio Input jacks
Connect the Handycam Station to the TV using the supplied RFU adaptor. Set the channel selector on the
RFU adaptor and your TV channel to VHF channel CH 3 or CH 4 whichever is not active in your area. With
this connection, the sound is in monaural.
Attaching the AC Power Adaptor
The Handycam Station is used with the AC power adaptor.
(1) Attach the AC power adaptor to the Handycam Station. (2) Connect the power cord to a wall outlet.
To remove the AC power adaptor
Press ADAPTOR RELEASE
To Fit the Camcorder to the Handycam Station
(1) Align the bottom front edge of the camcorder to the front end of the camcorder mounting surface of the
Handycanr Station. (2) Fit and slide the camcorder in the direction of the arrow until it clicks.
When you playback tapes, set the TVA/CR selector on the TV to VCR, or the input selector on the VCR to
LINE. If you connect with the RFU adaptor, set the channel selector on the RFU adaptor and your TV channel
to VHF channel CH 3 or CH 4 whichever is not active in your area.
To Remove the Camcorder
Press HANDYCAM RELEASE on the Handycam Station. Slide and lift up the camcorder.
21