Before adjusting, Adjusting the picture brightness and contrast, Introducing the on-screen display system – Sony GDM-400PS User Manual
Page 9: Menu osd, Press the menu button to display the menu osd, H e option, 7] q lang, M exit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Customizing Your Monitor
Before adjusting
• Connect the monitor and the computer, and turn them on.
• Select “ @ LANG~ in the MENU OSD, then select
"ENGUSH'(see page 17).
Adjusting the Picture Brightness
and Contrast
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1 Press the <i- (brightness) ■I’/f or 3 (contrast)
buttons.
The BRIGHTNESS/CONTRAST OSD appears.
1 J
b b
2
For brightness adjustment
Press the
buttons.
S5 C0NTR
a
5
i
T
a
26
o a
26
a
90.0kHz/ 7SHz
t-t
Horizontal Vertical
Frequency* Frequency*
n-WTi ♦ .. . for more brightness
^ ... for less brightness
b
For contrast adjustment
Press the
buttons.
mm
b *■
. . . for more contrast
.. . for less contrast ,
The OSD automatically disappeais after about 3 seconds.
To reset, press the RESET button while the OSD is on. The
brightness and contrast arc both reset to the factory settings.
* The horizontal and vertical frequencies for dve received input
signal appear in the BRIGHTNESS/CONTRAST OSD.
Introducing the On-screen
Display System
Most adjustments are made using the MENU OSD.
MENU OSD
Press the MENU button to display the MENU OSD.
This MENU OSD eoritains links to the other OSDs described
below.
MENU
15
dl S COLOR
Displays the COLOR OSD for adjusting the color
temperature.
d] C3
j
center
,
Displays the CENTER OSD for adjusting the centering
of the picture.
m HID
SCREEN
Displays the SCREEN OSD for adjusting the vertical
and horizontal convergence, etc.
[H 83 ZOOM
Displays the ZOOM OSD for enlarging and reducing
the picture.
[H e OPTION
Displays the OPTION OSD for adjusting the OSD
position and degaussing the screen, etc.
[H B SIZE
Displays the SIZE OSD for adjusting the picture size.
[7] Q LANG
Displays tlie LANGUAGE OSD for selecting the
language.
[8] O GEOM
Displays the GEOMETRY OSD for adjusting the picture
rotation and pincushion, etc.
m EXIT
Qoses the MENU OSD.