Step 2: setting up the base phone (continued), Choosing the dialing mode – Sony SPP-935 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up the base phone (continued)
Notes
Use only the supplied AC-T122 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the base phone close to the AC outlet so that you can easily
unplug the AC power adaptor.
Tip
• If vour telephone outlet is not modular, contact vour telephone ser\ ice
company for assistance.
Polarity of the plug
Modular
Choosing the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
DIAL MODE switch
If you are not sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as it is; otherwise, set to PULSE.
10^" Getting Started